Kaysville Foundation Pros logoKaysville Foundation ProsFoundation Repair · Kaysville, UT
Menu
driveway lifting in Kaysville, UT

Kaysville Foundation Pros

Driveway Lifting in Kaysville, UT

Driveway lifting in Kaysville, UT: polyurethane foam lifts sunken slabs level in hours, not days. Free estimates on garage approach repairs.

Serving Kaysville and nearby communities.

A driveway that's sinking near the garage is almost never a foundation problem, it's base erosion under the slab combined with Utah's freeze-thaw cycle working the soil loose underneath. Kaysville Foundation Pros lifts those sunken panels back to grade with polyurethane foam injection, which fills the void under the slab and raises it without tearing anything out.

It's faster and cheaper than a full driveway replacement, and it works on both approach aprons and full driveway panels.

What's included

What's Included with Driveway Lifting

Typically included: driveway inspection, access hole drilling, foam injection, slope correction, and hole patching. Optional: joint resealing for driveways with cracked or missing expansion joints. Customer prep: move vehicles off the driveway before the crew arrives.

How it works

How Our Driveway Lifting Process Works

  1. Driveway Inspection photo
    Step 1

    Driveway Inspection

    Sunken or sloped sections are identified for correction.

  2. Access Drilling photo
    Step 2

    Access Drilling

    Small holes are drilled at strategic points along the driveway.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding foam is pumped beneath the slab to raise it evenly.

  4. Slope Correction photo
    Step 4

    Slope Correction

    The surface is adjusted to restore proper drainage direction.

  5. Hole Sealing photo
    Step 5

    Hole Sealing

    Drilled holes are patched to blend with the existing surface.

  6. Surface Review photo
    Step 6

    Surface Review

    The driveway is inspected for even, stable elevation.

Materials

Materials and Methods for Driveway Lifting

Freeze-thaw cycles move soil under Kaysville driveways every winter, which is exactly why lightweight foam holds up better than loose fill long term.

  • Polyurethane Foam photo

    Polyurethane Foam

    Provides lightweight lift without adding excess weight to the soil, so the slab doesn't just sink again next freeze-thaw season.

  • Concrete Patch Mix photo

    Concrete Patch Mix

    Used to seal access holes after injection work for a clean finish.

  • Joint Sealant photo

    Joint Sealant

    Reseals expansion joints disturbed during the lifting process, keeping water out of the joint.

  • Surface Sealer photo

    Surface Sealer

    Protects the driveway from moisture and future cracking through winter freeze cycles.

  • Leveling Equipment photo

    Leveling Equipment

    Ensures accurate measurement during the lifting procedure so the slope drains correctly.

  • Bonding Primer photo

    Bonding Primer

    Improves patch adhesion to the original concrete surface for a durable repair.

Timeline

How long does driveway lifting take?

Most driveway lifts are a same-day job, start to finish.

  1. 01

    Inspection and estimate

    same day
  2. 02

    Foam injection and lift

    2–4 hours

    for a standard driveway

  3. 03

    Hole patching

    same day
  4. 04

    Drive-on ready

    within a few hours after injection

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and After Driveway Lifting Results

  • driveway lifting in Kaysville, UT
    Before
  • driveway lifting in Kaysville, UT
    After

FAQs

Driveway Lifting FAQs

Is polyurethane foam lifting better than mudjacking for my driveway?

Foam is lighter, cures faster, and doesn't add extra weight that can cause the slab to sink again. Mudjacking uses a heavier slurry and typically takes longer to cure before the driveway is usable.

How much does it cost to lift a sunken driveway vs replace it?

Lifting typically costs a fraction of full replacement since there's no demolition or new concrete pour. A free estimate will give you both numbers to compare for your driveway.

How long does driveway lifting take?

Most jobs are finished the same day, and the driveway is usually drivable within a few hours of the lift.

Do I need a permit to lift a driveway?

Lifting an existing driveway usually doesn't require a permit. Full replacement, especially work extending into the public right-of-way, may need one depending on your location.

Is DIY driveway lifting a good idea?

Driveway lifting kits exist, but without calibrated pressure equipment it's easy to over-lift one section and crack the slab further. A contractor controls the lift with monitoring equipment.

What causes a driveway to sink near the garage?

Base erosion from water runoff and freeze-thaw soil movement are the most common causes, especially where the driveway meets the garage slab at a joint.

Next step

Get a Driveway Lifting Estimate in Kaysville

Call (385) 348-5312 or request a free estimate and we'll check whether a lift or a replacement makes more sense for your driveway.

Ask about Driveway Lifting

Tell us about the project and how to reach you.

Call (385) 348-5312